Polyethylene film production
Blown polyethylene film, tubing, flat film, bags and pouches – mono and coex technology, made in our own plant since 1989.

Production
How our film is made
From granules to pallet – in our own plant in Lovászpatona.
- 01Raw materialLDPE, MDPE and HDPE granules – from recycled material on request.
- 02Film blowingOur mono and three-layer coex extruders blow the film tube, 8–200 µm thick.
- 03WindingThe cooled tube is wound on rolls – as tubing, half tubing or flat film.
- 04ConvertingCutting, sealing, perforating: bags, pouches and sheets, loose or on rolls.
- 05Inspection & deliveryQuality assurance to ISO 9001, ISO 14001 and BRCGS, careful packing, fast delivery.
Film production in our own plant since 1989
Szabó-Fólia Kft. has been producing polyethylene film and film packaging in Lovászpatona, Hungary, since 1989. As a family business we run the whole process in our own plant: from choosing the raw material through film blowing and converting to packing and delivery. That is why we can make film in any size, thickness, colour and finish – and why you usually receive our quote within 24 hours.
Raw materials: LDPE, LLDPE, MDPE, HDPE and recycled PE
The properties of a film depend above all on its raw material, so we always choose it for the application:
- LDPE (low-density polyethylene) – soft, flexible film that seals well; the material of most bags, pouches and liners.
- LLDPE (linear low-density polyethylene) – higher tensile and puncture strength, so a thinner film can carry the same load.
- MDPE (medium-density polyethylene) – stiffer than LDPE, more flexible than HDPE.
- HDPE (high-density polyethylene) – stiff, crackly film that stays strong even when thin.
- Recycled polyethylene – on request we also produce from recycled granules, from 20 microns upwards.
Film blowing on mono and coex extruders
We make polyethylene film by blown film extrusion. The granules melt in the extruder screw, the melt leaving the annular die is inflated with air into a film tube – the “bubble” – which cools as it rises and is then laid flat and wound. The blow-up ratio and the haul-off speed set the width and thickness of the film.
Our mono and three-layer coex extruders produce film from 8 to 200 µm (microns). Three-layer coextrusion lets each layer be designed on its own: the inner layer can provide good sealing, for example, and the outer one strength or colour.
Winding: tubing, half tubing, flat film
The cooled film tube is wound according to its use: as tubing, gusseted tubing, half tubing or flat film, on 76 mm paper or plastic cores. Flat film is made up to 1800 mm wide.
Converting: bags, pouches, sheets
Our converting machines turn the film into finished products: after cutting, sealing (double seal, cross-corner seal) and perforating they are packed loose, on blocks or on rolls.
- Loose bags
- Bags on block
- Bags on plastic pins
- Bags and pallet covers on roll (with core)
- Flat sheets, loose or on roll
- Garbage bags on roll
Available sizes
| Product | Width | Thickness |
|---|---|---|
| Loose bags | 150–1600 mm + gusset | 8–200 µm |
| Bags on block | 200–1250 mm + gusset | 8–60 µm |
| Bags on plastic pins | 300 + 2×100 – 1000 + 2×250 mm | 10–70 µm |
| Bags and pallet covers on roll (with core) | 400 – 1600 + 2×550 mm | 15–200 µm |
| Flat sheets, loose or on roll | 200–1800 mm | 15–200 µm |
| Garbage bags on roll | 400–1300 mm + gusset | 20–100 µm |
Work out the weight and pieces per kilogram of a bag or film in advance with our film calculator.
Quality assurance and food safety
Our production is certified to ISO 9001 (quality management), ISO 14001 (environmental management) and BRCGS Packaging Materials (food safety), so we also make packaging for direct food contact. See our certificates.
Who we produce for
We are a reliable supplier to many European and Hungarian wholesale and retail chains, as well as food, automotive, healthcare, trade and waste management partners. Our solutions by industry are on the Industries page.
How to order custom film
- Request – by form, e-mail or phone; if anything is missing, we ask.
- Quote – usually within 24 hours.
- Order – we usually confirm your written order within 24 hours as well.
- Production and delivery – we let you know about the delivery in good time.
Request a quote – size, thickness and quantity are enough to start, we help with the rest.