LDPE, LLDPE, MDPE or HDPE? – Which polyethylene film to choose
All four are polyethylene, yet they behave differently: one is soft and seals well, another is strong and crackly even when thin. Here is when to choose which.

What do they have in common?
LDPE, LLDPE, MDPE and HDPE are all polyethylene (PE). They differ in the structure of their molecular chains and therefore in density: the higher the density, the stiffer, stronger and less transparent the blown film. Made from a suitable grade, any of them can be used for food-contact packaging, and all of them are recyclable – LDPE and LLDPE carry recycling code 4, HDPE code 2.
The four materials at a glance
| Material | Density (g/cm³) | Properties | Typical use |
|---|---|---|---|
| LDPE | approx. 0.91–0.93 | soft, flexible, seals well, good clarity, stays flexible in the cold | bags, pouches, liners, cover films |
| LLDPE | approx. 0.915–0.94 | high tensile and puncture strength, high elongation | strong bags; in blends to raise load capacity |
| MDPE | approx. 0.926–0.94 | stiffer than LDPE, more flexible than HDPE | bags and pouches that need both body and flexibility |
| HDPE | approx. 0.941–0.97 | stiff, crackly, milky, strong even when thin, better moisture barrier | thin pouches and liners where low thickness is needed |
LDPE – the all-rounder
Low-density polyethylene is the material of most bags, pouches and liners. It is soft, follows the shape of the packed product, seals well and stays flexible in the cold – for example when packing chilled or frozen goods. Its clarity keeps the product visible. The downside: for the same load it needs a thicker film than HDPE or an LLDPE blend.
HDPE – strong even when thin
High-density polyethylene film is stiff, feels like paper and crackles. Its tensile strength is high even at low thickness, so bags can be made thinner – lighter and with less raw material. It is less transparent and milky, and once torn, the tear spreads more easily than in LDPE film. A good choice for light pouches and liners used in large numbers.
LLDPE and MDPE – the in-between options
Linear low-density polyethylene (LLDPE) is tough and stretchy: it resists puncture and stretches a lot before it breaks. That is why it is often blended with LDPE – the film can be thinner while the bag still carries the load. Medium-density MDPE balances stiffness and flexibility.
Blends and coex films
In practice most films are blends rather than a single material, and three-layer coextrusion lets each layer be designed on its own: one for sealing, another for strength or colour. Our page on polyethylene film production shows how this works.
Recycled polyethylene
Where food contact and perfect clarity are not required – for garbage bags or cover films, for example – recycled polyethylene is an eco-friendly and economical choice. The choice of colours is usually more limited, and it needs a thicker film for the same strength: we produce from recycled material from 20 microns upwards. See our products from recycled polyethylene.
How to decide
- What are you packing? Heavy, sharp or pointed items need a tough (LLDPE-containing) or thicker film; for light goods thin HDPE is enough.
- Is there food contact? Then you need virgin material, produced under food-safety certification.
- Should the product be visible? For clear packaging LDPE is the better choice.
- Manual or machine use? On automatic packaging lines the stiffness and slip of the film also matter.
- Where is it stored? Chilled, frozen or outdoor storage each call for a different composition.
Not sure which to choose? Tell us what you pack and how – we will suggest a material and thickness. Choosing the thickness is covered in a separate guide.

